ZW 300 System
GENERAL INTRODUCTION ( SHAFT WALL)
System Brief Description:
-In general terms, Walls, which enclose lift shafts, stairwells and other vertical shafts are the most important walls in a building from life-safety standpoint of view. Should a fire occur, firemen can’t use the lifts to reach the fire, the stairwells provide the only means for human egress within the building. Since these walls contain the lifelines of the building, they must be structurally strong to withstand lateral loads and provide the needed fire protection.
-ALZAHABIA • ( ZW300) SHAFT WALL Partitions System is ideal for commercial and domestic applications, where services are to be incorporated.
-The ZW300 System Consists of our Components (CH) Stud and (TK) Track that are easy to construct the required shaft wall partitions.
-All studs and tracks are manufactured to adhere to ASTM & C645 from pre-galvanized material to ASTM A653
-All studs are knurled to ease drywall screws penetration.
-Fire certification is also available upon request.
-ALZAHABIA offer A full range of studs as well as resilient bars.
-The range starts at 48mm to 148mm with track to Suit it in standard, deep and extra deep leg heights, in gauges from 0.5mm to 1.2mm.
FEATURES:
– Easily constructed, Easy to handle, Easy to cut to length using tin snips.
– Mineral wool can be incorporated for thermal or acoustic insulation.
– Resistance to Flexing.
– Components easily fit together, which result in Faster Completion.
– Air tight seal.
– Full range of strong & rigid stud widths available -50mm, 70mm Up To 150mm , 92mm, and 146mm comes Complete with service holes
For cables and pipes.
CAUTIONARY NOTES:
– Shaft Wall System ( ZW300 ) is a non-load bearing.
– Stud spacing, Air pressure loading and maximum flexural stress recommended.
must not be exceeded.
Lesser thickness than Stud & Runner thickness recommended must not be used..
– Lift landing door operating equipment must be mounted on building main structure.
– Exposure to excessive or continuous moisture and temperatures exceeding
42 degree celcious MUST BE AVOIDED.
– Lift Rails must be supported in each floor.
Click here to download the PDF file ( Installation )
